Central vacuum systems are popular for industrial and commercial settings, providing efficient and effective cleaning power for large spaces. However, choosing and installing the right system can be daunting. And several common mistakes can result in subpar performance or equipment failure.
In this article, we’ll discuss some of the most common mistakes to avoid when choosing and installing the best central vacuum systems. So you can select the best industrial central vacuum system for your needs and get the most out of your investment.
Mistake #1: Failing to Consider Home Size and Layout
One of the most significant mistakes homeowners make when choosing a central vacuum system is failing to consider the size and layout of their homes. It’s important to choose a central vacuum system. That can handle the size of your home and the number of rooms you plan to connect to the system. A too-small system may need adequate suction power, while a too-large system may be unnecessarily expensive.
When selecting a central vacuum system, it’s essential to consider your home’s layout. If you have multiple levels or a complex layout, you may need additional hoses, extensions, or inlets to ensure every room is accessible.
Mistake #2: Choosing the Wrong Type of System
Another common mistake when choosing a central vacuum system is selecting the wrong type of system. There are two main types of central vacuum systems: bagged and bagless.
Bagged systems are designed to capture dirt and debris in a disposable bag that must be replaced when full. Bagless systems, on the other hand, use a canister to collect dirt and debris, which can be emptied and reused. Each type of system has its advantages and disadvantages, and the decision should be based on personal preference.
Bagged systems tend to be less messy and more hygienic than bagless systems. However, they require more frequent maintenance, as the bags need to be replaced regularly. Bagless systems, on the other hand, are less expensive in the long run. Since you don’t have to buy replacement bags. However, they can be messier and require more maintenance to keep the canister clean.
Mistake #3: Not Considering the Power Unit’s Location
The power unit’s location is another crucial factor to consider when installing a central vacuum system. The power unit is the heart of the system and is responsible for generating the suction power needed to clean your home. It’s essential to place the power unit in a convenient and efficient location.
Ideally, the power unit should be installed in an area that is easy to access. Such as a garage or utility room. The location should also be central to the areas of the home that will be connected to the system. Minimizing the length of the piping required to connect the system.
Mistake #4: Neglecting to Install Enough Inlets
Another common mistake when installing a central vacuum system is needing more inlets. Inlets are the points in your home where you connect the vacuum hose to clean each room. It’s important to ensure you have enough inlets to provide convenient access to every area of your home.
A good rule of thumb is to have at least one inlet per floor and one inlet per 700 square feet of living space. This will ensure convenient access to every room in your home, minimizing the need to move the hose from room to room.
Mistake #5: Choosing the Wrong Hose and Accessories
Another common mistake when choosing a central vacuum system is selecting the wrong hose and accessories. The hose is the part of the system that connects to the inlets and allows you to clean each room. Choosing a hose that is the right length and diameter for your home’s layout is essential.
Additionally, you’ll want to select appropriate accessories for the surfaces you’ll be cleaning. For example, if you have a lot of carpeting in your home, you’ll want a power brush attachment that can effectively clean and groom your carpets. If you have hardwood or tile floors, you may prefer a hard floor brush or combination brush that can tackle carpets and hard surfaces.
Mistake #6: Skipping Professional Installation
Installing a central vacuum system can be a complex process that requires specialized knowledge and equipment. Skipping professional installation and attempting to install the system yourself can lead to costly mistakes, such as incorrectly installed piping, inadequate suction, or even electrical problems.
Hiring a professional installer with experience with central vacuum systems is essential. A professional installer can help you choose the right system for your home, determine the best location for the power unit and inlets, and ensure the system is installed safely and efficiently.
Mistake #7: Neglecting Regular Maintenance
Finally, paying attention to regular maintenance is a common mistake homeowners make regarding their central vacuum systems. Like any other home appliance, central vacuum systems require regular maintenance to function correctly and efficiently.
Regular maintenance may include:
- Emptying the canister or replacing the bag.
- Cleaning the filter.
- Inspecting the piping for leaks.
- Checking the power unit’s motor and electrical components.
Neglecting regular maintenance can reduce suction power, clogs, or even system failure.
Conclusion
Selecting and installing the best central vacuum systems for your industrial or commercial setting is critical for optimal performance and longevity. By avoiding the common mistakes outlined in this article, you can ensure that your system functions at its best, providing reliable cleaning power and a safer, healthier work environment.
If you’re in the market for an industrial central vacuum system, research your options carefully and consult with Complete Engineering Solutions to help you choose and install the best system for your needs. Take action now to ensure that your central vacuum system operates at peak efficiency and provides the best possible results for your business.